Lenovo 4294CTO Tablet User Manual


 
3. Click the UltraNav tab and proceed to customizing the touch pad.
For details, refer to the Help in the Utility.
Behavior of the UltraNav and an external mouse
By default, the TrackPoint and the touch pad are set to Enabled.
Note: If you want to attach an external mouse to a USB connector, select “Disabled.”
Disabling the TrackPoint or the touch pad
If you want to disable the TrackPoint or the touch pad, do either of the following:
Use the Fn+F8 key combination:
1. Press Fn+F8. A panel for UltraNav Device Settings pops up.
2. To disable the TrackPoint, select Enable touch pad only (disable TrackPoint).
To disable the touch pad, select Enable TrackPoint only (disable touch pad).
3. Click Close.
Congure settings in UltraNav properties window:
For Windows 7 and Windows Vista
1. Click Start Control Panel Hardware and Sound Mouse.
2. Click UltraNav tab.
3. To disable the TrackPoint, clear the check box for Enable TrackPoint.
To disable the touch pad, clear the check box for Enable touch pad.
4. Click OK.
For Windows XP
1. Click Start Control Panel Printers and Other Hardware Mouse.
2. Click UltraNav tab.
3. To disable the TrackPoint, clear the check box for Enable TrackPoint.
To disable the touch pad, clear the check box for Enable touch pad.
4. Click OK.
Note: You can also open the UltraNav properties window by clicking the UltraNav icon in the task bar. For
details, refer to the instructions in “Adding the UltraNav icon to the system tray” on page 57.
Adding the UltraNav icon to the system tray
For easy access to the UltraNav properties, you can add the UltraNav icon on the system tray.
To enable the display of the UltraNav icon on the system tray, do as follows:
1. Press Fn+F8. A panel headed UltraNav Device Settings pops up.
2. Click Manage Settings to open the Mouse properties window.
3. Click the UltraNav tab.
4. Select the check box for Show UltraNav icon on the system tray.
5. Click OK or Apply.
6. If your computer is a Windows 7 model, click Show hidden icons in the task bar. The UltraNav icon is
displayed. To add it to the task bar permanently, click Customize and proceed to customize the settings.
Chapter 2. Using your computer 57