Filter
Top Products
5. Position the memory module over the memory connector. Make sure that the
notch 1on the memory module aligns correctly with the connector key2 on
the system board. Push the memory module straight down into the memory
connector until the retaining clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to “Replacing the cover and connecting the
cables” on page 23.
Installing adapters
This section provides information and instructions for installing and removing
adapters. Your computer has two expansion connectors for PCI adapters, one PCI
Express (x1) adapter connector, and one PCI Express (x16) graphics adapter
connector. You can install an adapter up to 340 mm (13.4 inches) long in PCI
adapter connector 1 and PCI adapter connector 2.
To install an adapter:
1. Remove the computer cover. See “Removing the cover” on page 10.
2. Pivot the drive bay assembly upward to gain access to the system board.
*XXXXXXXXX*
*XXXXXXXXX*
14 User Guide