Filter
Top Products
2. Locate the memory connectors. See “Identifying parts on the system board” on
page 11.
3. Open the retaining clips.
4. Position the memory module over the memory connector. Make sure that the
notch1on the memory module aligns correctly with the connector key2on
the system board. Push the memory module straight down into the memory
connector until the retaining clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to “Replacing the cover and connecting the
cables” on page 24.
Installing adapters
This section provides information and instructions for installing and removing
adapters. Your computer has four expansion connectors. There are two connectors
for PCI adapters, one for a PCI Express x16 adapter (some models), and one for a
PCI Express x1 adapter.
To install an adapter:
1. Remove the computer cover. See “Removing the cover” on page 10.
Chapter 1. Installing options 13