Filter
Top Products
The following table shows the options that you will see in the Setup menu and the default.
Item Description Default
Video Type Press the left or right cursor button to select a
video type. Range: Auto - NTSC - PAL - SECAM
Auto
Video AGC Press the left or right cursor button to enable or
disable the automatic gain control for the video
source. Range: On - Off
On
Projection Press the left or right cursor button to select a
different projection type. Range: Desktop
mount-front of screen, desktop mount-rear of
screen, ceiling mount-front of screen, ceiling
mount-rear of screen
Desktop Front
Frequency Press the left or right cursor button to adjust the
A/D sampling clock. Range: 0 - 180 degrees
Auto-detected
Tracking Press left or right cursor button to adjust the
sampling number. Range: 0 - 100
Auto-detected
Digital Zoom Digital operation for zoom and pan adjustment.
Press Enter. The Zoom menu appears.
Press the up cursor button to zoom in. Press the
down cursor button to zoom out. Press Enter to
open the Pan menu. (You must zoom in before
you can enter the Pan menu.)
Use the cursor buttons to pan to the zoomed
image. Press the Menu button to exit.
n/a
Control Press the left or right cursor button to select
remote control method. Range: RS-232C - RJ-45
RS-232C
Network Setting Press the Enter button to adjust network settings
for the projector.
n/a
Chapter 5. On-screen Display menu controls 5-9