Filter
Top Products
1010 Battery pack
Important notice for replacing a battery pack:
ThinkVantage Toolbox has an automatic battery diagnostic that determines if the battery pack is defective. A battery
pack FRU should not be replaced unless this diagnostic shows that the battery is defective.
The only exception to this is if the battery pack is physically damaged or a customer is reporting a possible safety issue.
If ThinkVantage Toolbox is not installed in the computer, the customer should download this program before a
non-physically damaged battery pack is replaced. Note that a physically damaged battery pack is non-warranty
replacement.
Removal steps of battery pack
DANGER
Use only the battery specied in the parts list for your computer. Any other battery could ignite
or explode.
Unlock the battery latch 1 . Holding the battery latch in the unlocked position 2 , remove the battery pack in
the direction shown by arrow 3 .
3
2
1
When installing: Install the battery pack in the slot, and then make sure that the battery latch is in the
locked position.
1020 Bottom slot cover
For access, remove this FRU:
• “1010 Battery pack” on page 52
52 Hardware Maintenance Manual