Filter
Top Products
Symptom or error FRU or action, in sequence
0187
EAIA
data access
error—The access to
EEPROM is failed.
System board.
0188
Invalid
RFID
serialization
information area or
bad CRC2—The
EEPROM checksum
is not correct.
System board.
0189
Invalid
RFID
configuration
information
area—The EEPROM
checksum is not
correct.
System board.
0190
Critical
low-battery
error
1. Charge the battery pack.
2. Battery pack.
0191
System
Security —
Invalid remote
change requested.
The system configuration change has
failed. Confirm the operation and try
again. To clear the error, enter the BIOS
Setup Utility.
0199
System
security —
IBM security
password retry count
exceeded.
1. Confirm supervisor password and
try again.
2. Run BIOS Setup Utility.
01C9
More
than one
Ethernet devices are
found. Remove one
of them. Press
<Esc> to continue.
1. Remove either a Mini PCI Ethernet
card or an Ethernet daughter card;
or press Esc to ignore the warning
message.
2. System board.
0200
Hard
disk error—The
hard disk is not
working.
1. Reseat the hard disk drive.
2. Load Setup Defaults in BIOS Setup
Utility.
3. Hard disk drive.
4. System board.
021x
Keyboard
error
Run interactive tests of the keyboard
and the auxiliary input device.
0230
Shadow
RAM
error—Shadow RAM
fails at offset nnnn.
System board.
0231
System
RAM
error—System RAM
fails at offset nnnn.
1. DIMM.
2. System board.
0232
Extended
RAM
error—Extended
RAM fails at offset
nnnn.
1. DIMM.
2. System board.
Symptom-to-FRU index
ThinkPad G40, G41 53