Filter
Top Products
24
Chapter 2. Using Your Computer
2 Type correct password in the Enter Current Password field. Then
press Enter key once to move to the Enter New Password field, type a
new user password in.
3 Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4 Commit your password to memory, and press the Enter key.
To remove the password, do the following:
1 Select Set User Password, and press the Enter key.
2 Type correct user password in Enter Current Password, and press
Enter key thrice.
Note:
Make sure the Password on boot is set to Enabled if you need the
password protection at power on.
S9-S10 User Guide V1.0_en.book Page 24 Wednesday, July 23, 2008 5:53 PM