Lenovo T60 Laptop User Manual


 
When installing: When you attach the palm rest, do as follows:
1. Attach the fingerprint reader connector firmly to the system board.
2. Attach the palm rest so that the two projections of the palm rest (a) firmly fit
into the guide holes of the keyboard bezel as shown in this figure.
a
a
3. Align the front side of the palm rest to the frame, and press the front edge to
latch the palm rest to the frame as shown in this figure.
4. Close the LCD cover and turn the computer over. Then fasten the four screws
in the order shown in this figure.
Removing and replacing a FRU
ThinkPad T60 and T60p (15.4-inch widescreen) 63