Filter
Top Products
when prompted for the device driver that you want to install, click Have
Disk and Browse. Then select the appropriate device-driver (.inf) file
from the device subfolder.
v In the device subfolder, look for a setup.exe file. Double-click SETUP.EXE
and follow the instructions on the screen.
Setting a rescue device in the startup sequence
Before you start recovery from a CD, DVD, USB hard disk drive, or any other
external device, you must first change the startup sequence in the Setup Utility.
1. While turning on your computer, repeatedly press and release the F1 key to
enter the Setup Utility.
2. Select Startup and press enter.
3. In the Startup sequence, select your startup device.
4. Save and exit the Setup Utility.
5. Shut down the operating system and turn off the computer.
6. Do one of the following:
v If you have an external device, connect it to your computer.
v If you have a CD or DVD, insert it into your computer.
7.
Turn on your computer.
18