Filter
Top Products
Chapter 2. Using Your Computer
36
Note:
Make sure the Password Check is set to Always if you need the password
protection at power on. If password have been set, the Supervisor
Password will show Installed; otherwise it will show Not Installed.
To set a User Password:
Only Supervisor password have been set, User password can be set.
1 Turn on your computer. Press F2, while the initial screen is displayed.
The BIOS Setup Utility screen opens.
2 Select Security, using the cursor directional keys.
3 Select Set User Password, and press the Enter key. The Set User
Password window opens.
4 Choose your User password, which can be from one to eight
alphanumeric characters in any combination. Type it in the Enter New
Password field.
5 Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
6 Commit your password to memory, and press the Enter key.
7 Press F10 to exit.
8 Select OK in the Setup Confirmation window.