Filter
Top Products
37
Chapter 2. Using Your Computer
Changing or Removing the User Password
To change the password, do the following:
1 Select Set User Password, and press the Enter key. The Set User
Password window opens.
2 Choose your user password, which can be from one to eight
alphanumeric characters in any combination. Type it in the Enter New
Password field.
3 Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4 Commit your password to memory, and press the Enter key.
To remove the password, do the following:
1 Select Clear User Password, and press the Enter key.
2 Select OK in the Confirmation window.
Note:
Make sure the Password Check is set to Always if you need the password
protection at power on. If password have been set, the Supervisor
Password will show Installed; otherwise it will show Not Installed.