Filter
Top Products
6
The Icons on the LCD display are displayed as follows:
1. Operating Channel: Indicates the current operating channel of the detected Wi-Fi
signal.
2. Number of AP’s Detected: the left digit indicates which detected Wi-Fi signal is
currently displayed and the right digit indicates the total amount of Wi-Fi signals
detected.
3. Encryption indicator: “WEP” for WEP encryption, “WPA” for WPA encryption, and
“WPA2” for WPA2 encryption and “OPEN” indicates it is a non-encrypted signal.
4. “G” indicates the signal is a 802.11g wireless signal. “B” indicates the signal is a
802.11b wireless signal.
5. Signal strength indicator with 5 bars indicating the signal strength.
6. “In” indicates the signal is an infrastructure mode signal, “Ad” indicates the signal is an
Ad-hoc mode signal.
7. Battery indicator with 3 bars indicating battery power. When the indicator is empty,
please recharge the detector by inserting it into PC’s USB port.
8. SSID Indicator: Displays the SSID of the detected Wi-Fi signal, if the SSID is too long
the SSID indicator will scroll to display the complete SSID.
4. If the user wishes to re-scan/re-detect wireless SSID, just simply press “Seek/Lock” button
once. If the user wishes to re-detect a specific discovered SSID, then the user has to hold
down the “Seek/Lock” button for 4 seconds to enter “lock mode”. When the detector is in “lock
mode” an icon with a capitalized “L” appears in the top middle corner of the screen.
2
3
4
5
6
7
1
8