Filter
Top Products
Installation
4. Power Up
Connect the supplied power adapter to the FBR-1416 and power up.
Use only the power adapter provided. Using a different one may cause hardware damage
5. Check the LEDs
• The Power LED should be ON.
• The Status LED should flash, then turn Off. If it stays on or blinking after 60 seconds,
there is a hardware error.
• , there is a hardware error.
• For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the PC is
also ON.)
• The WLAN LED should be ON
• The WAN LED should be ON if the ADSL line is connected.
.
For more information, refer to Front-mounted LEDs in Chapter 1.
7