Filter
Top Products
PC Configuration
Figure 19: TCP/IP Properties (Win 2000)
5. Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, the FBR-1416 will act as a DHCP
Server.
Restart your PC to ensure it obtains an IP Address from the FBR-1416.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
• Enter the FBR-1416's IP address in the Default gateway field and click OK. (Your LAN
administrator can advise you of the IP Address they assigned to the FBR-1416.)
• If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
25