Filter
Top Products
3
Set up Printers
Before processing the printer settings, please make sure that you
have installed the accordingly printer driver in your local computer.
You can set up your network printer using steps below.
Step 1 Set up Local Window Printer Driver.
Step 2 Connect your printer to MFP server
Step 3 Connect MFP server to network.
Step 4 Turn on your printer and MFP server
Step 5 Configure your MFP server.
Step 6 Add Network Printer by standard windows add printer
wizard or PC user software.
Note:. If you use the HP Office Jet series printer, you are
advised to connect the MFP to PC before installing the driver
Add Network Printer
Use Add Printer Function of User Software
1. Start MFP Control Center, select your MFP server and
click Add Printer.(Fig 6)
2. Select USB1 Port or USB2 Port in Add printer box,
choose to use IP Address or Host Name to represent
MFP Server in printer port, and select Printing with
LPR (Line Printer Remote) or Print with Network
Path(SMB) in Select the network printing protocol
box.(Fig 7)
# LPR protocol is compatible for windows 2000/XP
/2003. SMB protocol is compatible for windows 98SE
/ME/2000/XP/2003. By SMB protocol, the PC
recognize the printer by printer name, which allows
you to connect the printer in USB1 or USB2 port as you
need.
# If your server is running on a different LAN than
your Windows PC such as wireless Windows PC, you
must choose IP address in IP Address or Host Name
box.