Filter
Top Products
4
3. Click Apply.
4. Select the desired printer driver and click Set Port to
Printer.
5. Click OK.
6. If you cannot find any printer driver in Printer List,
please install your printer driver first or click Add New
Printer to install the printer driver.
Use File Sharing
- File System: This product supports a file format of
FAT12/16/32. It will not support a drive formatted by NTFS,
etc.
- Naming Your Storages: The local drives of the two
storages in USB1 port and USB2 port are named as
USBx_DxPx, where USBx represents the USBx port, Dx
represents the the x-th Disk and Px represents the x-th
partition.
- Setting MFP Server Codepage: MFP Server supports
Windows code pages. If you want to communicate files with
FPS-3003 MFP server, you have to set your MFP server code
page to be same as the code page that your Windows PC is
using.
- Using SMB Method for Sharing Storages
1. Connect a USB storage device to this product.
2. Select My Network Places
3. Click Display the Computers of Workgroup
4. Double click Microsoft Windows Network icon.
5. Double click the Workgroup that MFP server belongs to.
The default Workgroup name is “LevelOne”. You ca n
refer to MFP Control Center or server’s web pages to get
it. You will see that the MFP server will be displayed as
the default host name "FPS-3003" or the host name
that you set.
6. If you can not find Workgroup name of MFP server in