Filter
Top Products
C
ONFIGURING
THE
S
WITCH
5-4
Main Menu
Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions.
The following table briefly describes the selections available from the
web-browser interface.
Table 5-2 Switch Main Menu
Menu Description Page
STATUS 5-6
Overview Provides a basic system description, including
system name, IP address, port, trunk, and
VLAN information.
5-6
Statistics Shows statistics for port, interface, and
RMON.
5-9
SYSTEM 5-13
Name Shows the name of the switch. 5-13
LAN Settings Sets the LAN IP address, subnet mask, and
gateway IP address.
5-14
Password Changes the password. 5-15
Tools 5-16
Reset to Factory
Defaults
Force the switch to perform a power reset and
restore the original factory settings.
5-16
Upgrade Firmware Upgrade the switch system firmware using a
file provided by LevelOne.
5-17
Upload/download
Configuration
Select this tool to Upload/download the
Switch system configuration file.
5-18
Set boot Image Select this tool to set the active image. 5-18
Restart Restarts the switch. 5-18
Static MAC Adds static MAC addresses to the switch
MAC address table.
5-19
Counter Config Selects traffic statistics you want to monitor. 5-20