Filter
Top Products
KVM-0850/1650 IP KVM switch
a. The “OSD: 10 SEC” means that the OSD windows display or PC system name exists 10 sec.
on your monitor. You can modify it from 05 sec to 99 sec. The factory default value is 10 sec.
b. The “SCAN TIME” means that scan interval from one PC port to next PC port. The default
SCAN time is 10 sec and the maximum scan time is 99 sec.
c. The “CHANGE PASSWORD” is for user to avoid all PC systems to be intruded by the other
person. The default password is 8 digits “00000000“.
There is an enter password window showed out when you select this item and then press
the Enter. The maximum password is eight digits. After you key in the password already and
press the Enter key, there is another window for confirming your typed password.
You need to retype the password again for rechecking your previous key-in password is
matched or not.
d. CONSOLE ON/OFF is used to prevent unauthorized use of the console. “CONSOLE ON”
means that any user can access the console without authentication. “CONSOLE OFF”
(factory default) means that user has to enter the password before getting access. When
the password is entered correctly the CONSOLE status will be set to ON. To lock the
console again the status has to be changed from CONSOLE ON to OFF via OSD. Also if the
current CONSOLE state is ON and you reset the KVM switch, the CONSOLE will be reset to
the OFF state.
e. When you finish the setting of PC name and log out of OSD setting mode, you will find the
PC name showed at the up-left corner of monitor. Now, you can use ESC key to clear the
message right away if you don’t need it.
f. If you would like to set OSD settings back to factory default value, you can execute “SCROLL
LOCK”, “SCROLL LOCK” , “R” keys in order. The bank seven segment LED on the front
panel will be flashed during the refresh process.
27