Filter
Top Products
KVM-0850/1650 IP KVM switch
Serial line speed
The speed the KVM-0850/1650 is communicating with the modem. Most of all
modems available today will support the default value of 115200 bps. In case you are
using an old modem and discovering problems try to lower this speed.
Modem Init String
The initialization string used by the KVM-0850/1650 to initialize the modem. The
default value will work with all modern standard modems directly connected to a
telephone line. In case you have a special modem or the modem is connected to a
local telephone switch that requires a special dial sequence in order to establish a
connection to the public telephone network, you can change this setting by giving a
new string. Refer to the modem's manual about the AT command syntax.
Modem server IP address
This IP address will be assigned to the KVM-0850/1650 itself during the PPP
handshake. Since it is a point-to-point IP connection virtually every IP address is
possible but you must make sure, it is not interfering with the IP settings of the
KVM-0850/1650 and your console computer. The default value will work in most
cases.
Modem client IP address
This IP address will be assigned to your console computer during the PPP
handshake. Since it is a point-to-point IP connection virtually every IP address is
possible but you must make sure, it is not interfering with the IP settings of the
KVM-0850/1650 and your console computer. The default value will work in most
cases.
Passthrough access to serial port via Telnet
Using this option, it is possible to connect an arbitrary device to the serial port and access
it (assuming it provides terminal support) via Telnet. Select the appropriate options for the
serial port and use the Telnet Console, or a standard Telnet client to connect to the
KVM-0850/1650 .
69