Filter
Top Products
Product Layout – Rear View
1) Power Jack
Receptor for the supplied power adapter
2) LAN Ports (1~4)
Connect Ethernet devices such as computers, switches or hubs.
3) WAN Port
The WAN port is the connection for the Ethernet cable to the Cable or DSL Modem.
4) Antenna
Detachable antenna allows users to change antenna if necessary.
Hardware installation steps
Decide where to place your Wireless Broadband Router
You can place your Wireless Broadband Router on a desk or other flat surface. For optimal
performance, place your Wireless Broadband Router in the center of your office (or your home) in a
location that is away from any potential source of interference, such as a metal wall or microwave
oven. This location must be close to power and network connection.
Setup LAN connection
z Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one of
the LAN ports of this product.
z Wireless LAN connection: locate this product at a proper position to gain the best transmit
performance.
6