Filter
Top Products
Figure 6: Authentication success
DUT authenticate PC2 using PEAP-TLS.
1. PC2 chooses the SSID of DUT as the Access Point.
2. Set authentication type of wireless client and RADIUS server both to PEAP_TLS.
3. Disable the wireless connection and enable again.
4. The DUT will send the user's certificate to the RADIUS server, and then send the message of
authentication result to PC2.
5. Windows XP will prompt that the authentication process is success or fail and end the
authentication procedure.
6. Terminate the test steps when PC2 get dynamic IP and PING remote host successfully.
Support Type: The router supports the types of 802.1x Authentication: PEAP-CHAPv2 and
PEAP-TLS.
1. PC1 is on Windows XP platform without Service Pack 1.
2. PC2 is on Windows XP platform with Service Pack 1a.
3. PEAP is supported on Windows XP with Service Pack 1 only.
4. Windows XP with Service Pack 1 allows 802.1x authentication only when data
encryption function is enable.