Filter
Top Products
N_One Wireless Broadband Router
Configuration Program
The Wireless Broadband Router contains an HTTP server. This enables you to con-
nect to it, and configure it, using your Web Browser. Your Browser must support
JavaScript.
The configuration program has been tested on the following browsers:
• Netscape 7.1 or later.
• Mozilla 1.6 or later
• Internet Explorer V5.5 or later
Preparation
Before attempting to configure the Wireless Broadband Router, please ensure that:
• Your PC can establish a physical connection to the Wireless Broadband Router.
The PC and the Wireless Broadband Router must be directly connected (using
the Hub ports on the Wireless Broadband Router) or on the same LAN segment.
• The Wireless Broadband Router must be installed and powered ON.
• If the Wireless Broadband Router's default IP Address (192.168.0.1) is already
used by another device, the other device must be turned OFF until the Wireless
Broadband Router is allocated a new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the Wireless Broadband Router:
1. After installing the Wireless Broadband Router in your LAN, start your PC. If your
PC is already running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the Wireless Broad-
band Router, as in this example, which uses the Wireless Broadband Router's
default IP Address:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter values as follows:
• User name admin
• Password password
12