LevelOne WBR-6000 Network Router User Manual


 
Chapter 4
PC Configuration
This Chapter details the PC Configuration required on the local ("Inter-
nal") LAN.
Overview
For each PC, the following may need to be configured:
TCP/IP network settings
Internet Access configuration
Wireless configuration
Windows Clients
This section describes how to configure Windows clients for Internet access via the
Wireless Broadband Router.
The first step is to check the PC's TCP/IP settings.
The Wireless Broadband Router uses the TCP/IP network protocol for all functions, so
it is essential that the TCP/IP protocol be installed and configured on each PC.
TCP/IP Settings - Overview
If using the default Wireless Broadband Router settings, and the default
Windows TCP/IP settings, no changes need to be made.
By default, the Wireless Broadband Router will act as a DHCP Server, automati-
cally providing a suitable IP Address (and related information) to each PC when
the PC boots.
For all non-Server versions of Windows, the default TCP/IP setting is to act as a
DHCP client.
If using a Fixed (specified) IP address, the following changes are re-
quired:
The Gateway must be set to the IP address of the Wireless Broadband Router
The DNS should be set to the address provided by your ISP.
If your LAN has a Router, the LAN Administrator must re-
configure the Router itself. Refer to Chapter 8 - Ad-
vanced Setup for details.
28