Filter
Top Products
Menu item Description
Std Network Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
AppleTalk
NetWare
LexLink
Net <x> Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
LexLink
For descriptions and settings of the network setup menus, see the following:
• “Network Reports menu” on page 167
• “Network Card menu” on page 167
• “TCP/IP menu” on page 168
• “IPv6 menu” on page 169
• “Wireless menu” on page 169
• “AppleTalk menu” on page 170
• “NetWare menu” on page 170
• “LexLink menu” on page 171
Note: The Wireless menu appears only when the printer is connected to a wireless
network.
SMTP Setup menu
Use the following menu to configure the SMTP server.
Menu item Description
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
Specifies SMTP server port information
Note: 25 is the default SMTP gateway port.
SMTP Timeout
5–30
Specifies the amount of time in seconds before the server stops trying
to send the e-mail
Note: 30 seconds is the factory default setting.
Reply Address
Use SSL
Disabled
Negotiate
Required
Specifies server information. This is a required item.
Notes:
• The message box has a limitation of 512 characters.
• Disabled is the factory default setting for Use SSL.
SMTP Server Authentication
No authentication required
Login / Plain
CRAM-MD5
Digest-MD5
NTLM
Kerberos 5
Specifies the type of user authentication required for scan to e-mail
privileges
Note: “No authentication required” is the factory default setting.
Understanding printer menus
166