Lexmark 16M1994 Printer User Manual


 
Print Settings
Setup menu
Menu item Description
Printer Language
PCL Emulation
PS Emulation
Sets the default printer language
Notes:
PCL emulation uses a PCL interpreter for processing print
jobs. PostScript emulation uses a PS interpreter for
processing print jobs.
PCL is the factory default printer language.
Setting a printer language as the default does not prevent
a software program from sending print jobs that use
another printer language.
Job Waiting
On
Off
Specifies that print jobs be removed from the print queue if
they require unavailable printer options or custom settings.
They are stored in a separate print queue, so other jobs print
normally. When the missing information and/or options are
obtained, the stored jobs print.
Notes:
Off is the factory default setting.
This menu appears only if a non-Read Only printer hard
disk is installed. This requirement ensures that stored jobs
are not deleted if the printer loses power.
Print Area
Normal
Whole Page
Sets the logical and physical printable area
Notes:
This menu does not appear if Edge to Edge is enabled in
the printer Setup menu.
Normal is the factory default setting. When attempting to
print data in the non-printable area defined by the Normal
setting, the printer clips the image at the boundary.
The Whole Page setting allows the image to be moved into
the non-printable area defined by the Normal setting, but
the printer will clip the image at the Normal setting
boundary.
The Whole Page setting only affects pages printed using
a PCL 5e interpreter. This setting has no effect on pages
printed using the PCL XL or PostScript interpreter.
Understanding printer menus
221