Lexmark 24T7406 Printer User Manual


 
Notes:
When Jam Assist is set to On, the printer flushes blank pages or pages with partial prints to the standard bin
after a jammed page has been cleared. Check your printed output for blank pages.
When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting reprints
jammed pages if adequate printer memory is available.
8
7
6
5
3
4
1
2
Area Area name Printer control panel message What to do
1 Upper rear door [x]page jam, open upper rear
door. [202]
Open the rear door of the printer, and then remove the
jammed paper.
2 Upper door and rear
duplex area
[x]page jam, open upper and lower
rear door. [231234]
Open the rear door of the printer and the rear duplex
area, and then remove the jammed paper.
3 Trays [x]page jam, open tray [x]. [24x] Pull out the indicated tray, and then remove the
jammed paper.
4 Duplex area [x]page jam, remove tray 1 to clear
duplex. [235–239]
Pull out tray 1 completely, then push the front duplex
flap down, and then remove the jammed paper.
5 Multipurpose feeder [x]page jam, clear manual
feeder. [250]
Remove all paper from the multipurpose feeder, and
then remove the jammed paper.
6 Inside the printer [x]page jam, lift front cover to
remove cartridge. [200–201]
Open the front cover and the multipurpose feeder,
then remove the toner cartridge and the imaging unit,
and then remove the jammed paper.
7 Standard bin [x]page jam, remove standard bin
jam. [203]
Remove all paper from the standard bin, and then
remove the jammed paper.
8 Automatic document
feeder (ADF)
[x]page jam, open automatic
feeder top cover. [28y.xx]
Remove all paper from the ADF tray, and then remove
the jammed paper.
Clearing jams 260