Filter
Top Products
Use To
Eco-Mode
Off
Energy
Energy/Paper
Paper
Minimize the use of energy, paper, or specialty media.
Notes:
• Off is the factory default setting. This resets the printer to its
factory default settings.
• The Energy setting minimizes the power used by the printer.
Performance may be affected, but print quality is not.
• Energy/Paper minimizes the use of power and of paper and
specialty media.
• Paper minimizes the amount of paper and specialty media
needed for a print job. Performance may be affected, but
print quality is not.
ADF Loaded Beep
Enabled
Disabled
Specify whether or not the ADF sounds a beep when paper is
loaded.
Note: Enabled is the factory default setting.
ADF Multi‑feed Sensor
On
Off
Detect when the ADF picks more than one sheet of paper at once.
Note: On is the factory default setting.
Quiet Mode
Off
On
Reduce the amount of noise produced by the printer.
Notes:
• Off is the factory default setting. This supports the
performance specifications for your printer.
• “On” configures the printer to produce as little noise as
possible. This is best suited for printing text and line art.
• For optimal printing of color‑rich documents, set Quiet Mode
to Off.
• Selecting Photo from the print driver may disable Quiet
Mode and provide better print quality and full speed
printing.
Run Initial setup
Yes
No
Set the printer to run the setup wizard.
Notes:
• Yes is the factory default setting.
• After completing the setup wizard by selecting Done at the
“Country select” screen, the default becomes No.
Understanding the printer menus 184