Filter
Top Products
Initial fax setup
Many countries and regions require outgoing faxes to contain the following information in a margin at the top or
bottom of each transmitted page, or on the first page of the transmission: station name (identification of the business,
other entity, or individual sending the message) and station number (telephone number of the sending fax machine,
business, other entity, or individual).
To enter your fax setup information, use the printer control panel, or use your browser to access the Embedded Web
Server and then enter the Settings menu.
Note: If you do not have a TCP/IP environment, then you must use the printer control panel to enter your fax setup
information.
Using the printer control panel for fax setup
When the printer is turned on for the first time or if the printer has been off for an extended time, a series of start-up
screens appear. If the printer has fax capabilities, then the following screens appear:
Station Name
Station Number
1 When Station Name appears, enter the name to be printed on all outgoing faxes.
a Press the button on the numeric keypad that corresponds with the number or letter you want. The first time
you press the button, the number for that button appears. When you press the button again, one of the letters
assigned to that button appears.
b Press the right arrow button to move to the next space, or wait a few seconds and the cursor will move to the
next space.
2 After entering the Station Name, press
.
The display changes to Station Number.
Faxing
88