Filter
Top Products
2-8 Service Manual
4044-XXX
Secondary User Error Message Table
Press and release the operator panel button two times to display the
user secondary error LED status. Each press and release action
must be performed within a half second. Locate the printer’s LED
status in the following table and take the indicated action.
User Error Message LED Status Action
Complex Page Ready, Error, and
Press Button on solid
Switch the printing
mode to a different
printing mode using
the Lexmark driver for
Windows, or push the
operator panel button
to resume printing, or
do an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
Memory Full Ready, Data, Error,
and Press Button on
solid
Change the printing
mode to Quick Print
Plus or reduce the
complexity of the job
or the resolution, or
push the operator
panel button to
resume printing, or do
an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
Resolution Reduction Ready, Data blinking
and the Error, Press
Button on solid
Switch from the GL/2
or raster mode to
Quick Print Plus mode
using the Lexmark
driver for Windows, or
press the operator
panel button to
resume printing, or do
an operator panel
reset by pressing and
holding the operator
button for more than
three seconds.