Filter
Top Products
3-12 Service Manual
4044-XXX
4. When the Error LED comes on solid, double-click the opera-
tor panel button.
5. Once the Error and Press Button LEDs start to blink, close
the top cover.
6. The Ready LED comes on solid and the Error and Press
Button LEDs continue blinking.
7. Double-click the operator button three times. The Paper Jam
LED comes on solid while the Error and Press Button LEDs
continue blinking.
8. Perform a long button press until all LEDs come on solid.
The printer is in Hex Trace mode
9. To exit the Hex Trace mode, turn the printer power off.
Restoring Factory Defaults
Restoring factory defaults returns the printer settings to the original
factory settings.
Perform the following steps to invoke factory defaults:
1. Turn the printer power off.
2. Open the top cover.
3. Turn the printer power on.
4. When the Error LED comes on solid, double-click the opera-
tor panel button.
5. Once the Error and Press Button LEDs start blinking, close
the top cover.
6. The Ready LED comes on solid and the Error and Press
Button LEDs continue blinking.
7. Double-click the operator button one time. The Data LED
comes on solid while the Error and Press Button LEDs con-
tinue blinking.
8. Perform a long button press until all LEDs come on solid.
9. The printer is reset to factory defaults.