Lexmark 840 Series Printer User Manual


 
Values are subject to change. See www.lexmark.com for current values.
Waste from Electrical and Electronic Equipment (WEEE) directive
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We
encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at
www.lexmark.com for your local sales office phone number.
ENERGY STAR
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic inputs. 14
Copying The product is generating hard-copy output from hard-copy original documents. not applicable
Scanning The product is scanning hard-copy documents. not applicable
Ready The product is waiting for a print job. 4
Power Saver The product is in energy-saving mode. 4
High Off The product is plugged into a wall outlet, but the power switch is turned off. 3
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is turned off, and the
product is in the lowest possible power consumption mode.
not applicable
Off The product is plugged into a wall outlet, but the power switch is turned off. 3
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be
substantially higher than the average. Values are subject to change. See www.lexmark.com for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode.
The Power Saver Mode saves energy by lowering power consumption during periods of inactivity. For this product, the Power Saver
Mode is entered immediately at the end of a print job. The Power Saver Mode does not affect the performance of this product and
therefore cannot be modified by the user.
Notices
41