Filter
Top Products
6 Squeeze the width guide tabs on the right guide, and slide the width guides to lightly touch the side of the stack.
Adjust the guides properly to alleviate repeated jams and paper feeding problems.
7 Insert the tray.
8 If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting
for the tray from the printer control panel. For more information, see “Setting the Paper Size and Paper Type” on
page 38.
Note: The difference between the standard 250-sheet tray and the optional 250- and 550-sheet trays is that the
standard tray accommodates A6-size paper, so the width guides slide farther to the center of the tray. You also need
to adjust the length guide specifically created for A6-size paper.
Loading paper and specialty media
43