Filter
Top Products
82
Configuration menus overview
Network menu
Use the Network menu to change printer settings on jobs sent through a network port (either Standard Network or Network
Opt <x>).
Parallel menu
Use the Parallel menu to change printer settings on jobs sent through a parallel port.
Setting Use this setting to Values
NPA Mode Send print jobs to the printer and query
printer status information simultaneously.
•Off
• Auto*
Mac Binary PS Configure the printer to process Macintosh
binary PostScript print jobs.
• Off—The printer filters PostScript print jobs using
standard protocol.
• On—The printer processes raw binary PostScript
print jobs from computers using the Macintosh
operating system. This setting often causes
Windows print jobs to fail.
• Auto*—The printer processes print jobs from
computers using either Windows or Macintosh
operating systems.
Set Card Speed Automatically detect the connection speed
of your network. You can disable this
setting to set the speed manually.
• Auto*—The printer detects current network
speed.
• 10Mbps
†
, Half Duplex—Forces the printer to try
to connect to the network only at 10Mbps, Half
Duplex.
• 10Mbps, Full Duplex—Forces the printer to try to
connect to the network only at 10Mbps, Full
Duplex.
• 100Mbps, Half Duplex—Forces the printer to try
to connect to the network only at 100Mbps, Half
Duplex.
• 100Mbps, Full Duplex—Forces the printer to try
to connect to the network only at 100Mbps, Full
Duplex.
* Factory default
† Megabits per second
Setting Use this setting to Values
NPA Mode Send print jobs to the printer and
query printer status information
simultaneously.
•Off
•On
• Auto*
Protocol Receive information at a much higher
transmission rate if your printer is set
to Fastbytes (if your computer
supports Fastbytes), or receive
information at a normal transmission
rate if your printer is set to Standard.
•Standard
• Fastbytes*
* Factory default