Lexmark Z35 Printer User Manual


 
ii
Edition: January 2002
The following paragraph does not apply to any country
where such provisions are inconsistent with local law:
LEXMARK INTERNATIONAL, INC., PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some states do not allow disclaimer of express
or implied warranties in certain transactions; therefore, this
statement may not apply to you.
This publication could include technical inaccuracies or
typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in
later editions. Improvements or changes in the products or
the programs described may be made at any time.
Comments about this publication may be addressed to
Lexmark International, Inc., Department F95/032-2, 740
West New Circle Road, Lexington, Kentucky 40550, U.S.A.
In the United Kingdom and Eire, send to Lexmark
International Ltd., Marketing and Services Department,
Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ.
Lexmark may use or distribute any of the information you
supply in any way it believes appropriate without incurring
any obligation to you. You can purchase additional copies of
publications related to this product by calling 1-800-553-
9727. In the United Kingdom and Eire, call 0628-481500. In
other countries, contact your point of purchase.
References in this publication to products, programs, or
services do not imply that the manufacturer intends to make
these available in all countries in which it operates. Any
reference to a product, program, or service is not intended to
state or imply that only that product, program, or service may
be used. Any functionally equivalent product, program, or
service that does not infringe any existing intellectual
property right may be used instead. Evaluation and
verification of operation in conjunction with other products,
programs, or services, except those expressly designated by
the manufacturer, are the user’s responsibility.
Lexmark and Lexmark with diamond design are trademarks
of Lexmark International, Inc., registered in the United States
and/or other countries. Color Jetprinter is a trademark of
Lexmark International, Inc.
Apple, Mac OS, and Macintosh are trademarks of Apple
Computer, Inc., registered in the United States and other
countries.
Other trademarks are the property of their respective
owners.
© Copyright 2002 Lexmark International, Inc. All rights
reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with
RESTRICTED RIGHTS. Use, duplication or disclosure by
the Government is subject to restrictions as set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013 and in
applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.
Federal Communications Commission (FCC)
compliance information statement
The Lexmark Z25 Color Jetprinter, Type 4105-005, and
Lexmark Z35 Color Jetprinter, Type 4105-005, have been
tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
The FCC Class B limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult your point of purchase or service representative
for additional suggestions.
The manufacturer is not responsible for any radio or
television interference caused by using other than
recommended cables or by unauthorized changes or
modifications to this equipment. Unauthorized changes or
modifications could void the user's authority to operate this
equipment.
Note: To assure compliance with FCC regulations on
electromagnetic interference for a Class B computing
device, use a properly shielded and grounded cable
such as Lexmark part number 12A2405 for USB
attach. Use of a substitute cable not properly shielded
and grounded may result in a violation of FCC
regulations.
Any questions regarding this compliance information
statement should be directed to: Director of Lab Operations,
Lexmark International, Inc., 740 West New Circle Road,
Lexington, KY 40550, (859) 232-3000.
European Community (EC) directives conformity
This product is in conformity with the protection requirements
of EC Council directives 89/336/EEC and 73/23/EEC on the
approximation and harmonization of the laws of the Member
States relating to electromagnetic compatibility and safety of
electrical equipment designed for use within certain voltage
limits.
A declaration of conformity with the requirements of the
directives has been signed by the Director of Manufacturing
and Technical Support, Lexmark International, S.A., Boigny,
France.
This product satisfies the Class B limits of EN 55022 and
safety requirements of EN 60950.
ENERGY STAR
The EPA ENERGY STAR Office Equipment program is a
partnership effort with office equipment manufacturers to
promote the introduction of energy-efficient products and to
reduce air pollution caused by power generation.
Companies participating in this program introduce products
that power down when they are not being used. This feature
will cut the energy used by up to 50 percent. Lexmark is
proud to be a participant in this program.
As an ENERGY STAR Partner, Lexmark International, Inc.
has determined that this product meets the ENERGY STAR
guidelines for energy efficiency.
Safety information
Use only the Lexmark power supply provided with this
product or an authorized Lexmark replacement power
supply.
Connect the power cord to an electrical outlet that is near
the product and easily accessible.
Refer service or repairs, other than those described in
the manual, to a professional service person.