Filter
Top Products
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Portrait Layout
- Only on some models.
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit
http://www.kensington.com
.
Connect the Kensington security system cable
between the Monitor set and a table.
y
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
NOTE
Connecting the Speakers
(55VS20)
- Only on some models.
1
Connect the input signal cable to the Monitor
before installing the speakers. Use a cable tie
to organize the cables.
3
After installing your speakers, use holders and
cable ties to organize the speaker cables.
y
Connect the speaker terminals noting the
correct polarity.
NOTE
2
Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.