LG Electronics 47WV30MS Printer User Manual


 
12
ENG
ENGLISH
ASSEMBLING AND PREPARING
<The sets joined with the guide
brackets>
<The sets after removing the guide
brackets>
<Removing the guide bracket through
the side gap>
How to Join Sets - Installing Set 2
How to remove the guide brackets
Unscrew the guide bracket screws from
the rear of the set and remove the guide
brackets.
Once the screws are removed, the guide
brackets will drop. You need to remove them
through the gap on the sides of the set.
This can be done only when there is enough
space between the set and the wall mount
plate or the wall to unscrew the screws.
(Please check whether there is enough
space to remove the screws before fixing the
guide brackets.)
Join Set 2 to Set 1 using the guide brackets
on the top side of Set 1 and mount the two
sets to the wall mount plate or the wall.
Remove the guide brackets after mounting
the sets.
Guide bracket
<Rear view of the set with the wall
mount plate>
Remove the
guide brackets