Filter
Top Products
Chapter 4. FUNCTION BLOCK
4 - 10
4.4 Errors on Function Block
This shows errors and resolutions in accordance with them.
Function block
Read
STAT
No.
Local
/Remote
Descriptions Initiali-za
tion
Array
type
Single
type
Resolutions
0
Operating with no fault
-
1
The base location number is exceeding
the proper setting range
Correct the number in accordance with the
proper range
(See Section 4.2)
2
H/W error of the base
Contact the service station
3
The slot location number is exceeding
the proper setting range
Set the right number to the slot loading the A/D
conversion module
4
The A/D conversion module on the slot is
empty
Load the A/D conversion module to the specified
slot
5 The module loaded isn't the A/D module
Load the A/D conversion module to the specified
slot
6
The channel number is exceeding the
proper range
- - Specify the available channel correctly
7
H/W error of the A/D conversion module
Contact the service station
8
The A/D conversion module's shared
memory error
Contact the service station
9 The available channels are not specified -
Make a correct specification of the available
channel on the initialize function block
17
Local
Average number exceeding the proper
range
- -
Correct the value to the proper range
(Number: 2 to 255)
128
H/W error of the communication module
for remote
See the manual for the remote communication
module
129
The base location number is exceeding
the proper setting range
Correct the number in accordance with the
proper range
(See Section 4.3)
131
The slot location number is exceeding
the proper setting range
Set the right number to the slot mounting the
A/D conversion module
133 The module loaded isn't the A/D module
Mount the A/D conversion module to the
specified slot
135
H/W error of the A/D conversion module
Contact the service station
136
The A/D conversion module's shared
memory error
Contact the service station
137 The available channels are not specified -
Make a correct specification of the available
channel on the initializing function block
145
Remote
Average number exceeding the proper
range
-
-
Correct the value to the proper range
(Number: 2 to 255)