Filter
Top Products
Function
28
1. Press the MENU button. Then, move to OPTION with the
∧, ∨, ＜, ＞ buttons and press the ◉OK button.
2. Press the ∧, ∨ buttons to move to Auto Power and
press the ◉OK button.
3. Press the ∧, ∨ buttons to move to On and press the
◉OK button.
• On: Connecting DC cable to the projector turns on the projector.
• Off: Connecting DC cable to the projector makes the projector in standby state.
• Press the BACK button to exit the menu screen.
To make the power of the projector turn on automatically when power is in
OPTION
Menu Language : English
Blank Image : Blue
Screen Capture
LED Mode : Normal
Auto Power : Off
Demo Mode : Off
Initial Setting : Home Use
1. Press the Q.MENU button on the remote control.
2. Press the ＜, ＞ buttons to move to LED Mode.
3. Move to a desired item with the ＜, ＞ buttons.
• LED Mode changes into Dimming mode automatically at specific temperatures (37°C or
higher). Dimming mode gets about 90% brightness of original led mode.
• LED Mode changes into Dimming mode automatically if use a optical battery.
• You can use this function through the MENU button.
• Press the BACK button to exit the menu screen.
To adjust the brightness of the screen
ꔂMove ꔉOK
LED Mode
Normal
1. Press the MENU button. Then, move to OPTION with
the ∧, ∨, ＜, ＞ buttons and press the ◉OK button.
2. Press the ∧, ∨ buttons to move to Screen Capture
and press the ◉OK button.
• It can only be elected when there is an input signal.
• It takes up to 2 minutes when capturing screen.
• Press the BACK button to exit the menu screen.
Screen Capture Function
OPTION
Menu Language : English
Blank Image : Blue
Screen Capture
LED Mode : Normal
Auto Power : Off
Demo Mode : Off
Initial Setting : Home Use
ꔂMove ꔉOK