Filter
Top Products
A11
Connecting the Display
Media Station Rear
AV1
AV2
(Video)
Connect the P&D cable
Connect to the speaker including a built-
in amplifier(AMP)
AV Input ports
PC signal inputs
Connect the audio cable to the *LINE
OUT jack of the PC sound card.
Connect the SCART cable
Power cut-off switch of the monitor
Connect various cables and the power cord and
turn on before using the monitor. Please turn the
monitor off if you intend not to use it for an
extended period of time to reduce power
consumption.
HDTV(YPbPr) Input ports - 720p/1080i
Connect the antenna cable (not included)
Connect the power cord
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that
the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of
PC sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to
Line Out using the card jumper of the program (Refer to the Sound Card Manual).
Fan: Should the temperature of the media station rise
above a preset level, the fan will start up
automatically to cool down the unit.