Filter
Top Products
A29
On Screen Display(OSD) Selection and Adjustment
To select TV channel settings and adjust the channel quality
OSD Adjust Description
To change the channel.
Press the buttons to select the TV
system of the country or part of the world
from where you want to receive the TV
channels.
To select the channel reception type.
: V/UHF / CABLE
Press the button to select C-CH for
aerial channels or S-CH for cable
channels.
If you know the C-(01~69) or S-channel
number(01~47), enter it derectly with the
digit buttons 0 to 9.
FINE TUNE
In case of poor reception, you can improve the reception by fine tuning. Use the
buttons to fine tune for the best picture and sound.
NAME
To see the assigned channel name.
It is possible to change the name stored in the memory or to assign a name to a TV
channel which has not yet been entered. A name with up 5 letters or numbers can be
given to the programme numbers 0 to 99.
Press the buttons to move cursor to be changed. -> Press the buttons
to select a character.(space, number 0~9, and alphabet A~Z) -> Press the
AUTO/SELECT button (or OK button on the remote control).
AUTO PR.
PROGRAMME
SYSTEM
SELECT
CHANNEL
STATION
PROGRAMME
SYSTEM
CHANNEL
NAME
AUTO PR.
BG
V/UHF
4
C 04
PR
PR
STATION
PROGRAMME
SYSTEM
CHANNEL
NAME
AUTO PR.
BG
V/UHF
4
C 04
PR
PR
AUTO PROGRAMME
STORAGE FROM
2
START
OFF
EDIT
SYSTEM
BG
PR
PR
Follow these steps : Select TV system -> Select a channel number from where you
want to storing for new channels. -> Press ON to start auto programming.
To adjust the AUTO PR. submenu
function, Press the OK -->
button on the remote control
To adjust the screen when using the VCR/DVD/HDTV/TV