Filter
Top Products
A12
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Using the Computer
1. Connect the P&D (Plug and Display) cable. When attached, tighten the
thumbscrews to secure the connection.
2. Connect the signal cable
When connecting D-SUB signal cable
When connecting DVI-D signal cable
PC
Media Station Rear
MAC
Mac adapter (not included)
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
P&D cable
Media Station Rear
Media Station Rear
PC
A
B