Filter
Top Products
22
INSTALLATION
6.
If the projection is rectangle-shaped,
1 Enlarge the projection to fit the screen size
Insert the hex wrench into the hole as illustrated (left) and turn it clockwise to enlarge the size
of the projection.
2 To move the projection to the left
Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to move the
projection to the left.
3 To move the projection to the right
Insert the hex wrench into the hole as illustrated (left) and turn it clockwise to move the projec-
tion to the right.
CAUTION
If you are using a paper screen, align the paper screen with the projection and
reattach it to the wall rather than moving the projection to the left or right.