Filter
Top Products
17
ENG
ENGLISH
CUSTOMIZING SETTINGS
MENU Settings
Picture
1
Press any button on the front of the monitor to
display the MONITOR SETUP OSD menu.
2
Press the MENU button to display the options
in the OSD menu.
3
Set the options by pressing the buttons on the
front of the monitor.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu
items, use the up arrow ( ) button.
Each option is explained below.
Menu
Analog
(D-SUB)
USB Description
BRIGHTNESS
o o
Sets the brightness of the screen.
CONTRAST
o o
Sets the contrast of the screen.
SHARPNESS
o o
Sets the sharpness of the screen.
y
If the screen is not displayed properly after adjusting the settings, use the "FACTORY RESET" op-
tion to revert back to the factory default settings. If necessary, enable the "WHITE BALANCE" option
again. This option is enabled only for analog (D-SUB) signals.
y
Analog: D-SUB (analog signal) input. USB: Internal signal through the USB.
BRIGHTNESS
CONTRAST
MENU PICTURE
SHARPNESS
EXIT
NOTE