Filter
Top Products
5
206-4142
(Continued from previous page)
C. Circuit Overloading
Consideration should be given to the con-
nection of the equipment to the supply circuit
and the effect that overloading of the circuits
might have on overcurrent protection and
supply wiring.
D. Reliable Earthing
Maintain reliable earthing of rack-mounted
equipment. Particular attention should be
given to supply connections other than direct
connections to the branch circuit (e.g. use of
power strips).
E. Mains Outlet Earthing
The apparatus with Class I construction must
be connected to a mains socket outlet with a
protective earthing connection.
PCS100R Installation on a Flat Surface
To install the PCS100R on a level surface (table
top, shelf, stacked with other equipment, etc.):
• Carefully place the
PCS100R
on a level surface.
• Note the operating temperature from the speci-
cations.
• Do NOT stack other equipment on the top of
the PCS100R.
• If necessary, place spacers or rubber feet (not
provided) on top and bottom.
IMPORTANT SAFETY INSTRUCTIONS