Filter
Top Products
LG RD-JT40/41 Service Manual
25
Caution
To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing
the lamp.
The reduce the risk of injuries to fingers and damage to internal components, use caution when
removing lamp glass that has shattered into sharp pieces.
To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not
touch the empty lamp compartment when the lamp is removed.
This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in
a proper manner.
Resetting Lamp Hours
If you replace the lamp after 1500hours of operation, please follow the instructions
below within 10 minutes of powering on.
Temp Information
When the LED lights up, it is warning you of the following possible problems:
1. The internal temperature is too high.
2. The fans are not working.
Turn off the projector and contact qualified service personnel for further help.