Filter
Top Products
30 Operation
Switches
Four switches for the control of functions as described in
Table 35.
DIP switches
Three DIP switch modules for the setting of functions as described in
Table 36
and as shown in
Figure 27
and
Figure 28.
Figure 27 Shunt range selection settings
Table 35 Switches
Designation Description
EQUALIZE MAN/AUTO Used to activate or deactivate the equalize function.
ACO Used to cancel the audible alarm signal.
CALIBRATE NORM/CAL Used to activate or deactivate the calibration function.
CONT rotary switch Six position switch: OFF, AMP, CHG VOLT, BAT VOLT, CAL, TST DISPL
Table 36 DIP switch modules
Designation Description
SHUNT SELECT To select the shunt size
TIMER To select the duration of the equalize
VOLT To select the equalize voltage
123456
S1
RANGE AMPS
MIN-MAX
= SWITCH IS ON
55 to 100
100 to 170
170 to 340
340 to 500
500 to 1000
1000 to 1700
1700 to 3400
3400 to 7000
7000 to 14000