Filter
Top Products
10
6 PRODUCT SPECIFICATIONS
Models 16-Port Switch Other model not available
Standards ! IEEE802.3u: 100BASE-TX
! IEEE802.3:10BASE-T
!
Ports ! Sixteen (16) 100BASE-TX/10BASE-T !
Media Support ! 100BASE-TX: Category 5 TP
! 10BASE-T: Category 3, 4 or 5 TP
!
Bandwidth ! 100BASE-TX: 200/100Mbps via Auto-Negotiation
! 10BASE-T: 20/10Mbps via Auto-Negotiation
!
Forwarding/
Filtering Rate
! 148810 packets/secondper port@100Mbps,maximum
! 14881 packets/second per port @ 10Mbps, maximum
Latency ! 8.5µsec @100Mbps,minimum
! 67µsec @10Mbps,minimum
MAC Addresses ! 8KSix(6)-byteentries maximum,Self-Learning
Buffer Memory ! 4Mbits
Duplex Modes ! Auto-Negotiation !
Auto-MDIX ! All TP ports support Auto-MDI/MDIX function
DIP Switches ! Two (2) forHome VLANsetting
! Four (4) for TRUNK setting
!
LED Indicators ! One(1) for Power
! One(1) per portforLink/ACT
! One(1) per portfor Full-Duplexor Collision
! Two (2) forHome VLANstatus
! Four (4) for TRUNK Group status
PowerSupply ! Internalfull range switchingpower supply
! Inputvoltage:100 ~240VAC+/-10%,50/60Hz
Power
Consumption
! 9.9W maximum
Environment ! OperatingTemperature:0° ~45°C(32° ~113°F)
! StorageTemperature:-20° ~70°C(-4° ~158°F)
! Humidity: 10% ~ 90% Non-Condensing
Certifications ! FCCClassA,CE MarkandTUVapproved
Dimensions ! 250x 150 x43 mm(9.8 x5.9 x1.7inches) !
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class Acomputing device pursuant to
Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference
in a commercial environment.
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
CE MARK WARNING
This is a ClassA product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.