Lindy 32503 Switch User Manual


 
Technical Data and Radio Frequency Energy
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (SEP 2004)
For Home and Office Use
Tested to comply
with FCC Standards
Model CPU Switch P4
No. 32503
CPU Switch P8
No. 32504
CPU Switch P16
No. 32505
Console (User) / Server Ports 1 / 4 1 / 8 1 / 16
Console / User Ports VGA (HD-15 female) + 2x PS/2 (MD-6 female)
PC / Server Ports VGA (HD-15 female) +
2x PS/2 (MD-6 female)
VGA (HD-15 female) +
2x PS/2 (MD-6 female)
HD-15 female system cable
connector
External Power Supply 9-12VDC 1A, approx. 1.8m cable
Operating Temperature +5°C ... 40°C, for indoor use only
Humidity 5 bis 85% rel.H. non condensing, for indoor use only
Measurements (HXWXD),
Weight
47 (1U) x 410 x 170 mm,
2.2kg
47 (1U) x 410 x 170 mm,
2.3kg
47 (1U) x 410 x 170 mm,
2.5kg
Model CPU Switch P4XT
No. 32512
CPU Switch P8XT
No. 32513
CPU Switch P16XT
No. 32514
Console (User) / Server Ports 1+1 / 4 1+1 / 8 1+1 / 16
CPU Switch Console Ports VGA (HD-15 female) + 2x PS/2 (MD-6 female)
Extender Console Ports
Extender PC Ports
VGA (HD-15 female) + 2x PS/2 (MD-6 female)
VGA (HD-15 female) + 2x PS/2 (MD-6 female), 2m KVM cable included
PC / Server Ports HD-15 female system cable connector
External Power Supply 9-12VDC 1A, approx. 1.8m cable, 1x for CPU Switch + 1x for Extender
Operating Temperature +5°C ... 40°C, for indoor use only
Humidity 5 bis 85% rel.H. non condensing, for indoor use only
Measurements (HXWXD),
Weight
47 (1U) x 410 x 170 mm,
2.4kg
47 (1U) x 410 x 170 mm,
2.5kg
47 (1U) x 410 x 170 mm,
2.7kg
Shielded cables must be used with this equipment to maintain compliance
with radio frequency energy emission regulations and ensure a suitably high
level of immunity to electromagnetic
disturbances.
This device complies with EN Standards EN55022 and EN55024 according to the relevant EC EMC
Directive.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation