Filter
Top Products
English Manual
34
<
Auto-Configuration Network Setup
>
The default setting of the WPS box is DHCP client. When the WPS box is connected to a
LAN that already has a DHCP server present, the WPS box takes an IP address assigned
to it by the server. When the WPS box is connected to a LAN that does not have a DHCP
server, the WPS box becomes the DHCP server in the network.
< IP Setup>
♦ You can select “obtain IP address automatically” or “Use the following IP
address”
♦ IP Address: The default value is 192.168.100.10.
♦ Subnet Mask: The default value is 255.255.255.0
♦ Default Gateway: The default value is 192.168.100.10
♦ DNS Server: The default value is 192.168.100.10
<DHCP Server Setup>
♦
You can select “auto(Enable/Disable DHCP Server” or “Disable”)
♦ Start IP: The start IP address of DHCP Server.