Lindy 38000 Switch User Manual


 
Manual English
2
Introduction
Thank you for purchasing the LINDY HDMI Extender with Switch function. This 2 port switch
also extends your high definition signal up to 70m when using FTP network cable. The extender
supports both HDMI and DVI devices (when using adapters for DVI) and is also fully HDCP
compliant.
With two HDMI inputs you can switch between high definition sources and then extend the
signal up to 70m from the source at Full HD 1080p or 1920 x 1200 for PCs. Switching between
devices is achieved using the push button on the switch.
Features
HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant
Supports HDTV resolutions: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p
Supports DVI-D resolutions of up to 1600 x 1200 and WUXGA (1920 x 1200) @ 60Hz
when used with PC graphic cards
Transmitter:
Input Ports: 2 x HDMI Female
Output Port: 2 x RJ45
Receiver:
Input Ports: 2 x RJ45
Output Port: 1 x HDMI Female
Device Selection by push button (local only)
Channel select LED
Supports High Definition audio, Dolby Digital True HD and DTS-HD
Built in automatic signal enhancement improves the signal quality when using longer
length cables
Package Contents
HDMI CAT5 Transmitter / Switch
HDMI CAT5 Receiver
5V DC Power Supply x 2 pcs
LINDY Manual
Installation
1. Make sure all your devices are switched off before connecting any cables
2. Connect your display to the receiver
3. Connect your sources to the 2 port transmitter
4. Connect your FTP network cables between the transmitter and receiver
5. Plug the 5V power supply into the transmitter and receiver
6. Turn on all devices
7. You should now see a picture on the screen from your selected port.